For Sale:
2x WRAP 1-1 boards.
2 Ethernet, 2 mini-PCI.
Includes:
• Board (no case)
• one CM9 90mw 802.11a/b/g card
• one u.fl to RP-SMA pigtail (this has been converted from SMA by means of an extra pin).
Price: $250 each.
Edit: These are new in their original boxes. They have only been powered up once to verify that they work.
u.fl to RP-SMA pigtails (converted from SMA):
Price: $5 each or $7.50 for two.
CF to IDE adaptor:
Price: $2 each.
u.fl to N-type pigtail (2.4ghz):
Price: $7.50 each.
u.fl to N-type pigtail (6ghz optimized):
Price: $9 each.
2x Firebird 400 remote control plane (it's wireless (although not specifically 802.11) and it's fun, so it's mostly like the other gear)
Includes remote control, plane, battery and charger.
Price: $70 each.
2x WRUSB kit - USB for a WRAP 1/2. (requires soldering)
Price: $10 each.
Email me at gmillar(a)internode(dot)on(dot)net, or post a reply here.
Edit: Or at gmillar(a)air-stream(dot)org, I'm a member now.
what freq does the plane run
what freq does the plane run on
can both fly around near each other ?
The planes are 27.195mhz.
The planes are 27.195mhz.
They both run on the same frequency though - I don't think you can fly them both near each other, unless you do some crystal swapping.
Probably not too difficult if you're good with a soldering iron.
I'll post pictures of all the gear soon.
One WRUSB kit sold, and
One WRUSB kit sold, and price reduced on the WRAP boards. Here's a picture of the WRAP boards
This was done to test the functioning of the board - it all works.
And here's an image of the pigtails that I can include with it.: