Router box for Seaview Downs

Router box for the Seaview Downs build.

[IMG]http://i49.photobucket.com/albums/f260/doctorfrag/as/P1010291s.jpg[/IMG]
Drilled some holes in the backplate, screwed on the standoffs. Made some custom rubber washers because I forgot to buy washers. I'm not sure they're grippy enough, but simple to replace if needed.

[IMG]http://i49.photobucket.com/albums/f260/doctorfrag/as/P1010290s.jpg[/IMG]
Fitted into the box. Deep box is deep. Need to drill holes in the bottom for cables.

[IMG]http://i49.photobucket.com/albums/f260/doctorfrag/as/P1010289s.jpg[/IMG]
RB800 with two R52Hn cards and space for two more. Can probably fit one more with the planned mast setup.

[IMG]http://i49.photobucket.com/albums/f260/doctorfrag/as/P1010292s.jpg[/IMG]
Bolts for the back struts, which I didn't measure the length of but happen to fit prefectly. The struts will be screwed into the back of the router box, and then to the pole bracket.

Drill needs charging. Body needs resting.

Thanks to Remyzero for sourcing the gear and updating the RB firmware.